Cat. 5 as a standard (100 MHz)

Multiple retermination possible with all kind of solid copper conductor gauges in the range of 26 AWG (0,4 mm) to 20 AWG (0,8 mm) (Special contacts for stranded wires 7 x 35 AWG (0,15 mm) are available upon request)

Cable with single wire copper conductors from

26 AWG (0,4 mm) to 20 AWG (0,8 mm) on cable and jumper side

Termination and removal of wires with the same tool

Maximum insulation diameter of 15 AWG (1,5 mm)

Reliable

Very compact pitch of 16 mm (14 mm pitch profile is available upon request)

Easy to use

Mono block circuit offering continuity

Can improve wire retention (straight IDC)

T-connection possible with 2 wires in one slot (2 wires of 24 AWG (0,5 mm) together or 1 wire of 24 AWG (0,5 mm) first and then 1 wire of 23 AWG (0,6 mm))

High rigidity and contact pressure on the conductor

100% Tin plating on the contact

Gas-tight connection area corrosion proof

IDC embodied contact in plastic casing

High-density installation thanks to 16 mm compact pitch (1240 pairs on a 2-meter vertical frame) 14 mm pitch profile is available upon request

Thickness of contact (0,8 mm)

Comprehensive range of protection circuits

Wiping resistant marking from 1 to 0 (10-pair modules) or 1 to 8 (8-pair modules) on jumper side

Compatible with all STG accessories

Specifications

Technical characteristics

Electrical Performances

Contact resistance

1 mΩ

Leading through resistance(20 mV / 10 mA, 50 mm cable)

26 AWG (0,4 mm) < 20 mΩ24 AWG (0,5 mm) < 16 mΩ23 AWG (0,6 mm) < 12 mΩ20 AWG (0,8 mm) < 8 mΩ

Insulation resistance (500 V)

> 10 GΩ

Dielectric strength (50 Hz)

5 kV

Materials

Plastic materials

Thermoplastic

Contact material

Bronze

Contact coating

100% Tin Plated

Flame retardant glass-filled polycarbonate

UL 94 V0

Color

Light Grey